![]() Press the Back Button (3) to do the following: Navigate through menu gauge/menu screens.Use the Five-Way Select Joystick to do the following: The Five-Way Select Joystick (2) allows you to navigate through the display screen from the left-hand switch cube. Use the right-hand trigger switch (1) to toggle through the Ride Command display screens. You also can navigate the touchscreen display using the hand controls. Here you can choose between a 12-hour or 24-hour format, enable GPS Time (which automatically sets the time to the time zone you currently are in) or set the time manually if GPS Time is not enabled.įor FTR 1200 S models, press the center button, shown below, on the console to access the App Tray.įrom the App Tray, select the Settings Menu > Time Settings. There you can choose between a 12-hour or 24-hour format, enable GPS Time (which automatically sets the time to the time zone you currently are in) or set the time manually if GPS Time is not enabled.įor cruiser, bagger and touring models equipped with the 7-inch touchscreen display, touch the Indian Motorcycle button at the top of the screen to access the settings menu.Īfter you’ve accessed the drop-down menu, tap the Settings icon. It can be adjusted through the Time Settings menu. On models equipped with RIDE COMMAND technology, the clock is set by GPS. Press and hold the RIGHT-TOGGLE switch until the next segment flashes. With the segment flashing, tap the RIGHT-TOGGLE switch to advance to the desired setting.Ĥ. Press and hold the RIGHT-TOGGLE switch until the hour segment flashes. Use the RIGHT-TOGGLE switch to toggle to the odometer display.Ģ. On models without Ride Command, use the right-hand trigger switch (1), shown below, to cycle through the Multi-Function Display on the analog gauge and set the clock.ġ. Release the switch.įTR 1200 and Model Year 2022 Chief Models Press and hold the MODE button until the next segment flashes. With the segment flashing, tap the MODE button to advance to the desired setting.Ĥ. Press and hold the MODE button until the hour segment flashes. Use the MODE button to toggle to the odometer display.Ģ. The MODE button can be found on the left-hand controls, as shown below.ġ. With the ignition switch on, use the MODE button (1) to toggle through the modes of the Multi-Function Display and change the clock settings. After completing the 1-minute segment, step 4 will save the new settings and exit the clock mode. Repeat steps 3-4 twice to set the 10-minute and 1-minute segments. Press and hold the LEFT-TOGGLE switch until the next segment flashes. With the segment flashing, tap the LEFT-TOGGLE switch to advance to the desired setting.Ĥ. Press and hold the LEFT-TOGGLE switch until the hour segment flashes. Use the LEFT-TOGGLE switch to toggle to the odometer display.Ģ. The clock must be reset any time the battery has been disconnected or discharged.ġ. Use the MODE switches to toggle through the modes. The power switch must be ON to access the Multi-Function Display. The MODE switches are located on the left-hand controls, as shown below. ![]() On models equipped with Multi-Function Display modes, use the MODE switches (1) to change clock settings. This article will explain how to change the time and time settings on your motorcycle's clock.
0 Comments
Leave a Reply. |